Voice control and integrations:
wBox app:
Control your electrical circuit locally and remotely from anywhere in the world using your smartphone. Create scenes and groups that will allow you to control multiple BleBox controllers at the same time.
With the “switchBox DIN” you can turn off, turn on or turn on devices with a power of up to 3680W for a given time!
The schedule with the astronomical clock function allows you to control at a given time and at sunrise and sunset based on geographical location.
For example: set the lights in the garden to turn on automatically after sunset and turn off at 23:59 to save electricity.
With the WiFi controller “switchBox DIN” you can measure the power of the device
Thanks to historical data and interactive charts, you can see how much electricity your devices used in individual hours or minutes.
Smart-home is not supposed to take away the possibilities, but to expand them, so you can connect 1 or 2 independently operating buttons to the “switchBox DIN”.
You can use bell (monostable) or candlestick (bistable) buttons. You can freely configure them in the wBox application!
If there is no proper wiring, then with the help of modules from the actionBox family, you can create buttons without running wires! actionBox family controllers send commands via WiFi network
A smart home should think for you, so do not control manually, connect the outputs of smoke sensors, motion sensors or alarm control panel outputs to the inputs of the “switchBox DIN” controller so that the control actions will take place automatically.
You can connect any 12-230V AC / DC signal and configure the actions to control this or any other BleBox device.
In combination with Google Home and Amazon Alexa voice assistants, you can control devices with your voice.
Give a voice command to your smartphone, Google speaker or Alexa.
You can also pair the “switchBox DIN” controller to:
The remotes connect to the device directly via μWiFi (do not require a WiFi network to operate). You can pair one remote control to many receivers, just like you can pair many remote controls to one receiver.
*In the case of residential areas over 50-70m^2 or in the case of switchgear located in the garage, or basement, please check the range of μWiFi remote controls in advance
Use BleBox sensors to control the “switchBox DIN” via WiFi network without running wires, for example:
*soon
BleBox controllers with the note “DIN” are intended for mounting on a DIN rail in a plastic distribution box.
In addition, the “switchBox DIN” controller is equipped with a built-in backlight that informs about the operating status and can indicate the connected load in color.
| Supply voltage: | 230V AC |
|---|---|
| Power consumption: | < 1W |
| Number of control outputs: | 1 |
| Outputs type: | relay, potential, short circuited to L |
| Maximum load: | 16A |
| Maximum power: | AC1 (resistive, cosφ>0.95): 16A @ 230V AC = 3680W AC3 (IEC60947-4-1): ~0.5kW @ 240V AC (motor)" |
| Measurement range: | 0...3680W |
| Measurement resolution: | 1W |
| Type of measurement: | current reading, total for the period, automatically calcutating the cost of energy cunsumed |
| Measurement history: | available online, resolution 5 min |
| Inputs number: | 2 |
| Inputs type: | optoisolated, logical, configurable, 12-230V AC / DC |
| Supported switches: | "monostable (push-button), bistable (traditional, cross switch), not-illuminated" |
| Number of built-in buttons: | 1 |
| Type of built-in buttons: | tact-switch, on / off function |
| Signaling on the housing: | color backlight |
| Housing type: | installation module DIN-1, width 17.5mm |
| Dimensions: | 90 (98.8) x 17.5 x 64.5mm |
| Protection Rating: | IP20 according to PN-EN 60529 |
| Housing: | ABS / acrylic, flammability class V-0 according to UL 94 |
| Mounting method: | direct mounting on a 35mm DIN rail according to PN-EN 60715 |
| Communication standard: | µWiFi, compatible with WiFi, 802.11g |
| Transmission frequency: | 2.4 GHz |
| Transmission type: | two-way, encrypted |
| API: | Open (technical.blebox.eu) |
| Mode: | direct connection (as an Access Point), WiFi connection via a standard router, connection with access from anywhere in the world (only Internet access required) |
| Compatible devices and systems: | Apple iPhone, Apple iPad, iPad Mini, Android, computers and mobile devices supporting HTML5 |
| Controller operating temperature: | from -20°C to 50°C |
