Voice control and integrations:
wBox app:
Control your roller shutters remotely, from anywhere in the world, using your smartphone. The controller uses the existing WiFi network, you do not need an additional control panel or any radio bridge.
Create scenes and groups that will allow you to control multiple blinds (shutterBox DIN controllers) at the same time.
Close the blinds intelligently, e.g. give the command “close the blinds to 70%”, you do not have to stand and hold the button.
In addition to the usual external roller shutters, the “shutterBox DIN” can also control facade blinds with slats.
The position of the roller shutter and slats can be set independently of each other. Decide how much light you let into your home.
The “shutterBox DIN” controller can also control roof windows, projector screens, balcony or terrace awnings, and even electric curtains.
The schedule with the astronomical clock function enables control at a given time and at sunrise and sunset based on geographical location – roller blinds are always controlled at the same time of day, regardless of the season.
When it gets dark, the blinds will automatically close so that you and the light in your room cannot be seen.
You can connect 2 control buttons to the “shutterBox DIN”. It is also possible to create a wired central button.
If there is no proper wiring, then with the help of modules from the actionBox family, you can create buttons without running wires! actionBox family controllers send commands via WiFi network
You can control devices with your voice with Google Home and Alexa voice assistants.
Give a voice command to your smartphone, Google or Alexa speaker.
You can also pair the “shutterBox DIN” controller to:
The remotes connect to the device directly via μWiFi (do not require a WiFi network to operate).
You can pair one remote control to many receivers, just like you can pair many remote controls to one receiver.
*In the case of residential areas over 50-70m^2 or in the case of switchgear located in the garage, or basement, please check the range of μWiFi remote controls in advance
Use BleBox sensors to control the “shutterBox DIN” via WiFi network without running wires, for example:
*soon
BleBox controllers with the note “DIN” are intended for mounting on a DIN rail in a plastic distribution box.
In addition, the “shutterBox DIN” controller is equipped with a built-in backlight that informs about the operating status.
| Supply voltage: | 230V AC |
|---|---|
| Power consumption: | < 1W |
| Outputs number: | 2 |
| Outputs type: | relay, short-circuited to L, configurable: independent or push-pull |
| Maximum load: | per output: 5A |
| Maximum power: | per output: |
| Inputs number: | 2 |
| Inputs type: | optoisolated, logical, configurable, 12-230V AC / DC |
| Supported switches: | "monostable (push-button), bistable (traditional, cross switch), not-illuminated" |
| Number of built-in buttons: | 1 |
| Type of built-in buttons: | tact-switch, up/stop/down function |
| Sygnalizacja na obudowie: | color backlight |
| Housing type: | installation module DIN-1, width 17.5mm |
| Dimensions: | 90 (98.8) x 17.5 x 64.5mm |
| Protection Rating: | IP20 according to PN-EN 60529 |
| Housing: | ABS / acrylic, flammability class V-0 according to UL 94 |
| Mounting method: | direct mounting on a 35mm DIN rail according to PN-EN 60715 |
| Communication standard: | µWiFi, compatible with WiFi, 802.11g |
| Transmission frequency: | 2.4 GHz |
| Transmission type: | two-way, encrypted |
| API: | open (technical.blebox.eu) |
| Mode: | direct connection (as an Access Point), WiFi connection via a standard router, connection with access from anywhere in the world (only Internet access required) |
| Compatible devices and systems: | Apple iPhone, Apple iPad, iPad Mini, Android, computers and mobile devices supporting HTML5 |
| Operating temperature of the controller: | from -20°C to 50°C |
