The proxiSwitch controller is equipped with a capacitive sensor and algorithms thanks to which it detects the proximity of the hand to its surface.
Thanks to the high sensitivity of the proxiSwitch controller, you can hide it under a kitchen counter, on the side of a wardrobe, in a wall or even in the middle of another object!
Only you know where it is hidden and where you need to touch to control!
Thanks to special algorithms, the controller adjusts the sensitivity itself, depending on the environment in which you use it.
The maximum thickness through which the controller will recognize the touch or closeness of the hand is about 3 cm (for chipboard, furniture board, solid wood). Furniture with a “honeycomb cross section” (air spaces) should be avoided.
The proxiSwitch controller can operate in 4 modes:
The proxiSwitch controller can also be used as a touch button for other BleBox controllers.
Connect the proxiSwitch output to the button input of DC controllers (12-24V) to control them by touching or bringing your hand closer (e.g. wLightBoxS, wLightBox, pixelBox, switchBoxDC)
| Supply voltage: | 12 – 24 V DC |
|---|---|
| Maximum current (total): | 5A |
| Maximum power: | 120 W |
| Energy consumption: | < 0,1W |
| Signaling on the housing: | blue diagnostic LED |
| Mode: | bistable, bistable with state memory, monostable NO, monostable NC |
| Detection Range: | depending on the material: plexiglass, solid wood, plywood, chipboard - 3cm, metal - detection with the entire surface, honeycomb panels - no detection |
| Maximum detection time in monostable mode: | 8 sec |
| Autocalibration: | at startup and every 15 seconds |
| Sensor: | proximity, capacitive sensor |
| Dimensions: | 38 x 38 x 19 mm |
| Housing: | made of polyurethane composition not containing halogens, self-extinguishing for thermal class B (130°C) |
| Protection Rating: | IP20 |
| Mounting method: | under the surface of nonconductive, adhesive tape |
| Operating temperature of the controller: | from -20°C to 50°C |
